How to check and store the vibrating screen

Before leaving the factory, the equipment shall be assembled by precision collection and no-load test run, and can only leave the factory after all indicators are checked to be qualified. Therefore, after the equipment is shipped to the use site, the user shall check whether the parts of the whole machine are complete and whether the technical documents are flawed according to the packing list and the delivery list of the complete equipment.

After the equipment arrives at the site, it shall not be directly placed on the ground, but shall be stably placed on flat sleepers, and the distance from the ground shall not be less than 250mm. If it is stored in the open air, it shall be covered with tarpaulin to prevent weather erosion. High frequency vibrating screen High frequency vibrating screen is called high frequency screen for short. High frequency vibrating screen (high frequency screen) is composed of vibrator, pulp distributor, screen frame, frame, suspension spring, screen mesh and other parts.

High frequency vibrating screen (high frequency screen) has high efficiency, small amplitude and high screening frequency. The principle of high-frequency vibrating screen is different from that of ordinary screening equipment. Because high-frequency vibrating screen (high-frequency screen) uses high frequency, on the one hand, it destroys the tension on the pulp surface and the high-speed vibration of fine materials on the screen surface, accelerates the large density of useful minerals and separation, and increases the probability of materials smaller than the separated particle size contacting the screen hole.

Post time: Oct-17-2022