Cone crushers are different from ordinary mechanical products. To enhance the durability of the equipment, we need to pay attention to some details and maintain it well during the later use process. Below, the author has sorted out some matters needing attention during the later maintenance of cone crushers for everyone:
The ore must be placed in the middle of the distribution plate. It is not allowed to directly feed the ore into the crushing chamber. Because doing so is likely to overload the crusher and cause uneven wear of the liners.
2. The output of the crusher.
3. Replacement of the mortar wall.
4. Replacement of the conical crushing wall.
5. Gear meshing.
6. Bowl-shaped bearings and sealing devices.
7. The cylindrical bushing and the frame are the third type of transitional fit. To prevent the rotation of the bushing, zinc alloy is injected into the upper groove of the bushing. When replacing the new bushing, it should be configured according to the actual size of the frame, because the fit relationship of the crusher will inevitably change after long-term operation and loading and unloading. If the gap is too large, it will cause the bushing to break.
8. Inspection of conical bushings and springs.
9. Protective covers should be added to the exposed rotating parts of the machine.
Post time: Apr-24-2025