Impact sand making machine is an important sand-making equipment, used to break large raw materials into the required fine particle materials. However, sometimes during use, the equipment may overheat, which not only affects production efficiency but also may reduce the service life of the equipment. Therefore, it is very important to detect overheating problems in a timely manner and take corresponding measures.
First, the reasons for the overheating of the impact sand making machine equipment
Insufficient or substandard lubricating oil: Lubricating oil is crucial for the normal operation of impact sand making machines. If the lubricating oil is insufficient or of substandard quality, it will increase the friction of the equipment, generating excessive heat and causing the equipment to overheat.
2. Unreasonable equipment design: During the design of the impact sand making machine, there may be some issues with unreasonable structural or parameter Settings, which can lead to overheating of the equipment. For instance, the design of the feed inlet is not smooth, resulting in either excessive or insufficient material flow. The material of the impact plate is not suitable, resulting in poor wear resistance and other issues.
3. Cooling system failure: The cooling system of the impact sand making machine is responsible for dissipating the heat generated during the operation of the equipment. If the cooling system malfunctions and cannot dissipate heat normally, it will cause the equipment to overheat.
Second, solutions to overheating of impact sand making machine equipment
1. Timely replenish lubricating oil: When using the impact sand making machine equipment, regularly check the oil quantity and quality of the lubricating oil to ensure that it is sufficient and of qualified quality. Once it is found that the lubricating oil is insufficient or of substandard quality, it should be replenished or replaced in time.
2. Shutdown inspection: When the impact sand making machine overheats, the operation of the equipment should be immediately stopped for a comprehensive inspection. Check the wear condition of the impact plate, the lubrication status of the bearings, whether the fan operates normally, etc., and identify the cause of overheating.
3. Inspect and repair the cooling system: Regularly inspect the cooling system of the impact sand making machine to ensure its normal operation. Once a malfunction in the cooling system is detected, it should be repaired promptly to ensure that the cooling system can dissipate heat normally.
Post time: Jul-09-2025