Shredder/Metal Crusher Parts——Grate
Description
Grate is the wearing part of crusher and an important part of crusher. The most consumable wearing parts in crusher production are grates. The most consumable wearing parts in crusher production are sieve bars. The consumption of sieve bars is an important link in mine production, so the service life of grate plays a very important role in creating economic value.
In the production of grate, the traditional process is easy to cause the appearance deformation of products, which is not only difficult to correct, but also increases the labor cost. Our innovative technology has our own experience in the production and processing of screen strips, which can solve all kinds of situations. Hardness, tensile strength, etc. Can meet customer requirements. The annual output can reach 1600T, high-quality control and high-efficiency production are your new choice.
High manganese steel screen bar and alloy steel screen bar are two common types in crushers, which have good toughness and good deformation and hardening ability. Common materials include Mn13, Mn13Cr2, Mn18Cr2 (i.e. ultra-high manganese) or special components according to working conditions.
Main materials (can be produced according to customer requirements.)
|
Element |
C |
Si |
Mn |
P |
S |
Cr |
Ni |
Mo |
Al |
Cu |
Ti |
|
Mn13 |
1.10-1.15 |
0.30-0.60 |
12.00-14.00 |
＜0.05 |
＜0.045 |
/ |
/ |
/ |
/ |
/ |
/ |
|
Mn13Mo0.5 |
1.10-1.17 |
0.30-0.60 |
12.00-14.00 |
≤0.050 |
≤0.045 |
/ |
/ |
0.40-0.60 |
/ |
/ |
/ |
|
Mn13Mo1.0 |
1.10-1.17 |
0.30-0.60 |
12.00-14.00 |
≤0.050 |
≤0.045 |
/ |
/ |
0.90-1.10 |
/ |
/ |
/ |
|
Mn13Cr2 |
1.25-1.30 |
0.30-0.60 |
13.0-14.0 |
≤0.045 |
≤0.02 |
1.9-2.3 |
/ |
/ |
/ |
/ |
/ |
|
Mn18Cr2 |
1.25-1.30 |
0.30-0.60 |
18.0-19.0 |
≤0.05 |
≤0.02 |
1.9-2.3 |
/ |
/ |
/ |
/ |
/ |
| Remak: Other materials you need to customize, WUJ will also provide professional advice according to your actual situation. | |||||||||||
Grate photos of WUJ warehouse
